Drying Logs
Record drying readings
Log meter readings in the drying grid or by telling Wave, then fix, annotate and review your drying log. Sample values help anyone on your team who is new to drying learn the goals, and your readings stay as you entered them.
Log the real numbers from your meters, by typing in the grid or just telling Wave, and your drying log becomes a clean, day-by-day record. Wave generates sample dry logs based on what real drying science would be, to help anyone on your team who is new to drying understand the drying goals for the job. Your measured readings sit right alongside them, exactly as you entered them.
Availability: Drying logs are available on Basic and above, and included in the free trial. On Starter, your company gets 5 free drying logs, and readings work the same on those logs. See Find and start your drying log.
Each chamber is its own block, with rows for temperature, relative humidity (RH), grains per pound (GPP) and material moisture, and days as columns.
Rooms can dry for different numbers of days. A line above each room's table shows how many days it dries and the day its drying ends, so keep recording readings in each room that is still drying. A room whose equipment changes from day to day also shows read-only Air movers and Dehumidifiers rows under its readings. See Per-room drying days.
Color shows where each value came from. Blue is a reading a person measured. Plain ink is the plan Wave drafted, including values Wave filled in when you logged only part of a day.
Use a log you already have
Have a drying log from another source? Attach it in a chat from Home, or in the job's chat. Wave reads it, answers questions about it and records any readings you tell it, so you can keep recording from there.
Record in the grid
- Open Jobs, pick the job, and select Drying.
- Click the cell for the chamber and day you measured, then click it again or start typing. On a phone, tap the cell to open an edit sheet.
- Enter the value and press Enter. Esc cancels.
Enter the fields you measured. GPP is calculated for you from temperature and RH. Material moisture is in meter points for flooring, walls and ceilings, and in %MC for wood when the meter is calibrated for wood. To switch between °F and °C, use the temperature unit toggle in the tab header.
Fix a typo fast: press ⌘Z (Ctrl+Z on Windows) on the Drying tab to undo a reading edit, and ⇧⌘Z (Ctrl+Shift+Z) to redo. On desktop, the undo arrows in the job header work too. Editing one field leaves the others in that cell untouched, and an undo puts back only what that edit changed.
Record by chat or voice
Tell Wave the numbers the way you would say them on site, in the job's chat. On desktop, the chat sits beside the tab. On a phone, pick Chat from the job's view menu.
"Temp 72, humidity 41 in the master bedroom"
"Kitchen floor is at 30 points today"
Wave logs the numbers to the right chamber and day, and checks with you if it isn't sure which. It records the fields you state, and anything missing for that day is filled from the plan in plain ink. You can correct any value anytime. Tap the mic to dictate readings hands-free. See Use voice input.
Fix and annotate the log
On desktop, right-click a cell, a day header or a chamber header to open its menu. On a phone, the edit sheet carries the day actions.
- Mark a reading n/r. Choose Mark not readable, or type n/r in the cell. It prints as n/r.
- Mark a day not monitored. Choose Mark day not monitored… and add an optional reason, which goes into the log's notes. Each chamber reads n/r for that day. This is available on days without measured readings.
- Correct a day's date. Click the date in a day column (it says "Change this date" when you hover). Pick the date, and leave Shift this and following dates on to move the rest of the schedule with it. The day's targets stay as planned.
- Remove or restore the pull reading. If equipment came out with no final reading taken, open the last day's menu and choose Remove pull reading. The tab and PDF then note that the pull reading was omitted. Restore pull reading brings it back. Removing is available when that column has no measured readings.
- Add notes. Type in the notes box under a chamber, or use Add note for Day N… or Add chamber note… to pin a note to a day or a room. Notes print on the PDF, and each note's author can delete it.
- Write the closing note. Leave it blank and the PDF prints Wave's default statement, which reflects what the readings show. Or write your own. Either way, the note summarizes the record. Deciding when the structure is dry is your call.
- Copy to a spreadsheet. Choose Copy day, Copy table or Copy log (all chambers), then paste.
Your readings are yours
Readings you record stay as you entered them. Adjusting or regenerating the plan updates future targets.
On the Drying tab, blue marks what you measured and plain ink marks the plan, so the source of each value is easy to see. Spot-check readings on site, and give the log a quick review before you export it, because the PDF presents all values in one consistent style. See Export a drying log.
Ask Wave how it's going
Ask Wave how the job is drying in the job's chat: "are we on track?" or "why is the kitchen still wet?" Wave answers from your measured readings.
Related
- About drying logs
- Adjust a drying plan: change equipment, days or chambers
- Export a drying log
- Use voice input: dictate readings on site
- Per-room drying days: rooms that dry longer than the rest
